近日，一臺GENMA 65噸移動式港口起重機（MHC）在太倉制造基地潤禾碼頭順利發運，即將運抵客戶碼頭投入集裝箱裝卸作業。該設備在設計階段即充分結合碼頭實際工況，以定制化方案助力客戶實現高效、穩定、低維護的運營目標。

針對客戶碼頭地基承載條件，GENMA對設備行走系統進行了專項優化，通過增加輪胎數量有效分攤載荷，顯著降低了對碼頭結構的壓力要求，從而減少基建改造投入，實現“設備適應碼頭”的靈活部署理念。

本臺MHC最大起重量65噸，最大工作幅度32米，采用全液壓驅動系統，覆蓋起升、回轉、變幅與行走四大機構，并搭載國際一線動力系統，確保在持續高強度作業中保持動力充沛、運行可靠。

值得關注的是，該設備在實際作業中能夠有效應對集裝箱重心偏移帶來的吊裝晃動問題，實現平穩起吊與移動，既提升了作業安全性，也降低了對操作精度的依賴，進一步提高整體裝卸效率。

GENMA堅持以實際作業場景為基礎，開展產品設計與工藝優化，為客戶提供可信賴的物料起重搬運解決方案。

A GENMA 65-ton Mobile Harbor Crane (MHC) was recently shipped from RHP Port at the Taicang manufacturing base and is now en route to the customer’s terminal for container handling operations. Designed with the terminal’s actual working conditions in mind, this customized solution enables the customer to achieve efficient, stable, and low-maintenance operations.
To suit the ground-bearing capacity of the customer's terminal, GENMA optimized the crane’s travel system by increasing the number of tires. This effectively distributes the load, significantly reducing ground pressure, minimizing the need for civil upgrades, and realizing the flexible concept of “equipment adapting to the terminal.”
With a maximum lifting capacity of 65 tons and a maximum working radius of 32 meters, this MHC employs a fully hydraulic drive system that covers hoisting, slewing, luffing, and traveling functions. It is also equipped with an international top-tier power system, ensuring reliable and powerful performance during continuous, high-intensity operation.
Notably, during operation, the crane effectively handles load sway caused by off-center containers, enabling smooth lifting and movement. This not only improves operational safety and reduces dependence on operator precision but also further enhances overall handling efficiency.